Upcycling Inherited Jewellery
Karen booked a private design consultation to talk about upcycling inherited jewellery. She had recently lost her father and had inherited some jewellery, Karen wanted the gold and some of the rubies and diamonds upcycled (re-used) to make a new ring.
Karen was keen on a modern channel setting within a deep band, she didn’t want the ring to be very wide, but she wanted it quite deep to fully house her stones securely.



Mark started by carefully un-setting the diamonds and rubies that Karen wanted re-set into her new ring. He lined these up and accurately measured them to obtain the width and depth the new ring needed to be.



He placed Karen’s gold into a crucible ready for melting and started preparing the ingot mould. Using his torch he heated the ingot mould to warm it up and remove any moisture from the metal – doing this stops the gold from spitting when poured.



Mark melted Karen’s gold and started to clean it by adding some flux, this absorbs impurities that can affect the hand making process when upcycling inherited jewellery.



He also used a carbon stick to stir the molten gold, this ‘double cleaning’ process ensures a smooth pour and better finish when the gold is rolled out afterwards.



Mark poured the molten gold into the ingot mould and opened it up to reveal the new ingot inside. He started to anneal the gold to soften it. This is the process of gently heating the gold and leaving it to slowly cool in the air making it malleable and easier to work with.



Mark rolled the gold through our steel rollers to change the shape of the ingot into a ring profile. Each turn of the wheel brings the rollers closer together, this stretched the gold ingot out – making it longer and thinner.



After each turn through the rollers Mark re-annealed the gold, you can see the ‘cherry red’ colour of the gold below – this is the point just before it melts, its then left to slowly cool down.



Mark hand formed a band in the correct width and depth for Karen’s diamonds and rubies. Once the gold work was complete, it was time for Marcel to channel set her gemstones.



Marcelo skilfully drilled out a channel with a seat for each gemstone to sit on. He hand placed each gemstone onto its seat and gently pressed the channel of gold over the outer edges to securely hold them in place.



Mark gave the ring a good polish on our wheel to bring the gold up to a high shine. It was a complete delight to welcome Karen back to our shaftesbury design studio to collect her handmade gold, ruby and diamond channel set eternity ring.























Come and talk with us about upcycling inherited jewellery.
We offer jewellery insurance for the pieces we craft from scratch or refurbish entirely, in partnership with TH March. Click here for more information.
Have a browse through what our customers say about us.
FAQ – Frequently Asked Questions
Yes — we can melt down your own gold, of any age or carat, and use it as the metal for a new piece exactly like this one.
Yes – we can craft a similar piece in all new (recycled) gold, silver or platinum for you, or top up your metal if you don’t have enough.
Yes — every piece we make is bespoke, so we can create something inspired by this story but personalised to you. Book a free consultation and we’ll talk through what’s possible.
It depends on the metal, gemstones, and complexity of the design, so we always provide a personal quote. As a guide, see our Pricing Guide for typical starting prices, or book a free consultation for an accurate quote for your idea.
Timeframes vary depending on the piece and process involved — typically a few weeks for simpler work, and up to 6–10 weeks for a full bespoke design. We’ll give you an accurate timeframe for your specific piece at your consultation.
Book a free, no-obligation consultation — in person at our Shaftesbury Design Studio, by video call, or over the phone. We’ll talk through your idea, any gold or gemstones you’d like to use, and what’s possible, before any design work begins.
Book a Private Design Consultation.
Are you ready to have a chat about a jewellery creation? Our private consultations are held free of charge with no obligation to proceed.
We can meet in person at our Shaftesbury Design Studio or via Video Call. We can work via courier service if you are not local to us and have customers all over the UK.