The ‘Little Planet’ Ring – from Mother to Daughter
Lisa had an opal ring that she wanted re-worked into a 30th birthday present for her daughter.
She also had a selection of diamonds and some family gold that she wanted to use in the new ring.



Lisa made an appointment with Louise at our Shaftesbury Design Studio and brought her ring, gold and diamonds with her.
Lisa loves this opal and had worn her original ring quite a bit, this had resulted in an amount of wear and tear across the top of her opal.
Louise suggested re-polishing the top to bring it back to life. Opal are fantastic gemstones to re-polish, you can see the difference this makes in the video below.
Re-polishing old opal:



Lisa thought her daughter might like a halo of diamonds set around her opal. First we had to un-set the opal and diamonds from Lisa’s original rings.



After we had re-polished the top of this amazing opal and brought it back to life, Louise showed Lisa some different stone layouts so she could have a think about the style of ring her daughter might like handmade.



Some of Lisa’s diamonds are quite big, most halo diamonds are smaller than these, during their discussions, Lisa and Louise agreed to omit the largest diamonds from the halo.



Setting the diamonds down into the gold means the halo needed to be wide enough and deep enough to completely house the diamonds, the largest diamonds would make this halo disproportionately large.



Lisa thought that her daughter would like a modern design, with the opal set in the middle in a rubover style.
Rubover style setting (also know as bezel setting) is where a ring of gold is gently pressed or ‘rubbed’ over the edge of the gemstone to hold it in place.



Mark our Head Goldsmith, handmade this ring from Lisa’s family gold. The star of the show – Lisa’s opal, had its collet (setting) made to measure around it.
Mark then handmade an elegant band to compete the metal work on this piece. He gave the gold a good polish on our polishing wheel to bring it up to a high shine.



Louise had a conversation with Marcelo our Stone Setter, they agreed to lower the main setting as Louise felt it looked too much a like top hat from the side view. Lisa’s opal is quite high – this makes it almost ball shaped instead of a flat slice, the central setting needed to be high enough to hold it in place securely.



Birmingham Assay Office applied a full UK hallmark to this ring comprising of; our HJ Makers Mark, a Purity Mark for gold, an Anchor for Birmingham, a Crown signifying gold, a Date Letter (Z) for 2024 and a special mark for the Coronation of King Charles |||. (This coronation mark is no longer available).
On the opposite side of the band they applied our Honour logo.



Marcelo expertly plotted each diamond around the halo, he grain set these with exacting precision. This particular type of grain setting is a clever way of disguising different sizes of diamonds.
Re-polishing old opal, and grain setting diamonds:



Each diamond in this design is a different size, after plotting out and grain setting like this, the size difference of these diamond is far less noticeable.
You can see Marcelo grain setting the diamonds above. The care and attention he took in setting her opal is incredible. From the side view you can see how he expertly curved the gold setting to match the curve of the opal.



This creation needed a final polish on our wheel from Mark and a good clean in our ultrasonic.
Lisa came back to our Shaftesbury Design Studio to collect her daughters 30th birthday present!



We recently found out that Lisa and her daughter call this ring ‘The Little Planet’
– we thought this was a very apt nickname for it!
– During her Design Consultation, Lisa commented on how well the Peace Lilly was doing in our Design Studio – it seemed fitting for Louise to take the finished photos with it!













Come and talk with us about re-polishing old opal.
We offer jewellery insurance for the pieces we craft from scratch or refurbish entirely, in partnership with TH March. Click here for more information.
Have a browse through what our customers say about us.
FAQ – Frequently Asked Questions
Yes – as long as your own material is of gem-quality, we can cut or polish it for you. We can also source rough material for a specific cut or shape to be formed.
Yes – we can melt down your own gold, of any age or carat, and use it as the metal for a new piece exactly like this one.
Yes — gemstones that have lost their sparkle over time can often be re-cut or re-polished, and we can reset them into a new or existing piece.
Yes — every piece we make is bespoke, so we can create something inspired by this story but personalised to you. Book a free consultation and we’ll talk through what’s possible.
It depends on the metal, gemstones, and complexity of the design, so we always provide a personal quote. As a guide, see our Pricing Guide for typical starting prices, or book a free consultation for an accurate quote for your idea.
Timeframes vary depending on the piece and process involved — typically a few weeks for simpler work, and up to 6–10 weeks for a full bespoke design. We’ll give you an accurate timeframe for your specific piece at your consultation.
Book a free, no-obligation consultation — in person at our Shaftesbury Design Studio, by video call, or over the phone. We’ll talk through your idea, any gold or gemstones you’d like to use, and what’s possible, before any design work begins.
Book a Private Design Consultation.
Are you ready to have a chat about a jewellery creation? Our private consultations are held free of charge with no obligation to proceed.
We can meet in person at our Shaftesbury Design Studio or via Video Call. We can work via courier service if you are not local to us and have customers all over the UK.