Re-Design – Salt and Pepper Diamond Engagement Ring
Paul had proposed to Alice and she had happily accepted! He had purchased a 14ct rose gold ring that was set with a pear shaped salt and pepper diamond.
Unfortunately, when the ring arrived from aboard it wasn’t quite as described. Paul was elated that Alice had said yes, but disappointed with the ring, he contacted Louise about re-designing it.
This couple were not local to our Shaftesbury Design Studio, so they made a telephone appointment to discuss re-designing an engagement ring over the phone. Following their consultation Paul and Alice sent their original ring to us.
You can see that the craftsmanship isn’t great, the soldering of the band onto the setting is far from perfect – negatively affecting the structural integrity of the ring. The band is very thin and it’s a bad idea to leave the point of the stone uncovered as it can be damaged.





Alice had some ideas for re-designing an engagement ring, she wanted to add in some white diamonds and aquamarine gemstones. She loved her salt and pepper diamond, but wanted a more vintage style ring. Louise suggested having pear shaped aquamarines to echo the shape of her main diamond. Adding round brilliant cut white diamonds added contrast to the grey of her salt and pepper one.
Louise worked through a few different designs with Alice. You can see the CAD images that Louise presented to Alice, CAD (Computer Aided Design) is a powerful computer program that allows us to create jewellery designs and produce photo-realistic images for our customers to view.
A Salt and Pepper Diamond is a diamond that is heavily included, this means the inclusions inside of the diamond change how the gemstone looks. White diamonds are traditionally prized for their clarity (clear-ness) and their lack of colour (white-ness), here, with the salt and pepper diamond we celebrate the fact that it is grey and heavily included.
This pear shape has been rose cut – this means that it is flat on the bottom and cut (faceted) across the top. White diamonds are flatter on the top and cut (faceted) into a point on the bottom – they are cut to maximise the amount of sparkle that bounces out of the stone – the light enters the top of the diamond, is bent across and then back up – when it leaves the stone we see ‘sparkle’.
Due to the nature of this salt and pepper diamond, the inclusions inside of the stone will interrupt the journey of the light and thus, this diamond wouldn’t display that same sparkle, so it has been cut this way to best showcase its beauty.









Alice and Paul decided upon platinum for her engagement ring, Alice wanted to keep her grey salt and pepper diamond in rose (pink) gold, so Louise suggested setting this into 18ct rose gold. Alice wanted a millgrain edge to her settings – these tiny bobbles give a vintage look and feel to a piece.
There was a small curve in Alice’s wedding band to allow her engagement ring to fit against it. Paul was keen to have the original 14ct rose gold incorporated into his wedding band.
The curve in Alice’s wedding band also resembles her star sign – Taurus, so Louise incorporated a V shape to symbolise Aries for Paul in his band. This subtle personalisation of each wedding band meant a lot to this couple.






Louise sourced six round brilliant cut white diamonds, and two high grade aquamarine pear shape gemstones to be added to Alice’s salt and pepper diamond. You can see the stone layout above. Alice was keen to have aquamarines added into her engagement ring because it is her mums birthstone (March).
Alice and Paul loved their new designs and approved their photo-realistic images, they both wanted to ‘see’ what their rings would look like before they were actually made.
The beauty of using CAD is that we can 3D print a resin copy of the design for you to try on before any precious metals are cast. You can see Alice wearing her resin copies out and about, she really enjoyed this part of the creation process, it gave her complete peace of mind that what she had chosen was exactly what she wanted.
The platinum parts of these rings were created in CAD and then 3D printed, we decided to hand make the rose gold parts, so these are missing from the print below. (The V shape and edge of Paul’s wedding band and the setting for Alice’s salt and pepper diamond have not been printed – because they will be hand made).





It was time for us to cast their wedding bands in platinum and the main section of Alice’s new engagement ring. There is a light fingerprint type texture left on the surface of the metal from the casting process, you can see this below.
This texture needs removing and the platinum polishing to a high shine. In our workshop Mark used needle files, different grits of sandpaper and our polishing wheel to make this platinum shine!
Mark handmade the setting for Alice’s salt and pepper diamond from 18ct rose gold. He melted their original 14ct rose gold ring down and used it to edge Paul’s wedding band and fill in his V section.






The next job was to solder the two precious metals together; the platinum and the rose gold. After another polish, these rings were ready for hallmarking. You can see our HJ makers mark, plus the orb symbol for platinum and a 950 in a house – this is the purity mark for platinum as it is 95% pure (5% alloy to strengthen it).
Alice also has a 750 mark (75% pure) for her 18ct rose gold setting, and Paul has a 585 mark (58.5% pure) for his 14ct rose gold section.
Following the Covid-19 pandemic Birmingham Assay Office brought out a rainbow mark, you can see this piece of history applied to their rings as well.
The anchor on its side is the mark for Birmingham Assay Office and the date letter for 2020 was V.









Our last, but very important job, was to set Alice’s gemstones. Her salt and pepper diamond was set into a demi-rubover setting; this is where the point is set and the curve of the diamond is also set, but the sides are left exposed. This gives a delicate look and feel. Her white diamonds and aquamarines were fully rubover set (also called bezel set) and then given a millgrain edge.
The platinum was gently pressed (or rubbed) entirely around the edge of each gemstone to hold it in place, then a tiny tool is used to create the bobbles on the top of the setting.
It was such a pleasure to be able to create these for Alice and Paul, from a poorly made engagement ring, they now have a full wedding set to love and cherish. Alice’s engagement ring encapsulates every design element that she wanted to include and can now be worn, loved and enjoyed every day.
Their wedding bands are simple but have subtle details that bring additional meaning for this couple, they are strong and are ideal for everyday wear – for the rest of their lives.
Here are the finished photos – re-designing an engagement ring.












We were thrilled to receive these images from Alice and Paul of their very special day!
Come and talk with us about re-designing an engagement ring.







We offer jewellery insurance for the pieces we craft from scratch or refurbish entirely, in partnership with TH March. Click here for more information.
Have a browse through what our customers say about us.
FAQ – Frequently Asked Questions
No — many bespoke commissions start with just an idea, an inspiration image, or even something similar to this story. We’ll work through the details with you at your consultation, before any CAD design begins.
We pride ourselves on bespoke jewellery designs that are important to our clients, we can make changes to a previous design to mean it is created as a bespoke piece for you.
Yes — every piece we make is bespoke, so we can create something inspired by this story but personalised to you. Book a free consultation and we’ll talk through what’s possible.
It depends on the metal, gemstones, and complexity of the design, so we always provide a personal quote. As a guide, see our Pricing Guide for typical starting prices, or book a free consultation for an accurate quote for your idea.
Timeframes vary depending on the piece and process involved — typically a few weeks for simpler work, and up to 6–10 weeks for a full bespoke design. We’ll give you an accurate timeframe for your specific piece at your consultation.
Book a free, no-obligation consultation — in person at our Shaftesbury Design Studio, by video call, or over the phone. We’ll talk through your idea, any gold or gemstones you’d like to use, and what’s possible, before any design work begins.
Book a Private Design Consultation.
Are you ready to have a chat about a jewellery creation? Our private consultations are held free of charge with no obligation to proceed.
We can meet in person at our Shaftesbury Design Studio or via Video Call. We can work via courier service if you are not local to us and have customers all over the UK.