Restoring Mum’s Engagement Ring

Sharon booked a private design consultation with Louise to talk about restoring mum’s engagement ring, it was 18ct yellow gold and platinum. Sharon explained that this ring held a huge amount of sentiment, but it was very old and worn and needed some restoration work completed.

Sharon explained that she had lost a side diamond and that another jeweller had glued a cubic zirconia into the empty setting saying that was all that could be done. The glue had failed and the cubic zirconia had fallen out.

Louise offered two initial solutions, one – we could try and re-build the top of the setting and supply and set a matching diamond, or we could 3D scan the head into a computer and then and re-create it in CAD and cast a new platinum head, also supplying and setting a matching side diamond.

Louise had some concerns about the stability of the old brittle platinum, one shoulder looked like it had been flooded with solder and then had a hole drilled through it to try and match the other side.

This would mean that the whole shoulder would collapse if heat was applied to any part of the ring.

Marcelo our stone setter, took a close up look under huge magnification and identified many areas of the ring that were failing, broken, cracked and crumbling. There had even been some repairs done in 18ct white gold and not platinum.

This meant that option one – to re-build what was originally there was no longer possible, when the foundation metal is this bad, building on it with new metal is just not a good idea.

Louise called Sharon and explained that this ring needed a whole new platinum head, there had been so many different repairs (some good and some bad) done over time to the old ring, that we couldn’t laser new platinum over the top of the original setting.

Louise hi-lighted a scratch across the top of one of Sharons diamonds – this is quite common with older jewellery that has been loved and worn every day. This diamond would tolerate being re-set so there was no need to replace it.

Whilst the second option – to re-create a new platinum head, was more expensive, Sharon concluded that it was also the best option as she she wanted to wear the ring everyday. She asked Louise to send over some CAD images for the settings.

Louise showed Sharon three round settings with the same pattern on the side and rubover setting style on the top. Sharon asked if the central setting could be made to look squarer and the two outer settings made to look more triangular.

Whilst this was not how the ring was originally made, it had been repaired so many times, with additional metal soldered on the top, that it was how Sharon remembered the ring.

The 18ct yellow gold band was completely fine to re-use, so the new platinum head was created to fit the original band in Sharon’s finger size. It was important to Sharon that we retained as much original material as possible when restoring mum’s engagement ring.

A wax copy was 3D printed and used for lost wax casting in platinum. This was soldered to the original yellow gold band and then ‘cleaned up’. Cleaning up is the process of removing the fine texture that is left on the metal from the casting process.

Different grits of very fine sandpaper were used to buff the platinum up to a soft shine.

Sharons original two diamonds and a third matching diamond were set into their new settings, Louise had sourced a matching old 8 cut diamond in the same colour and clarity.

The final step is a good clean and a polish on our wheel to bring the gold and platinum up to a high shine. You can see the difference between the old head of the ring and the new replica we made when restoring mum’s engagement ring.

Sharon was over the moon and very emotional when she came to collect her ring.

She left us this Google Review – ‘ We asked Louise if they could bring my late mum’s engagement ring back to new life as it had sadly been very badly worn and lost diamond and I really thought was beyond repair of any kind. We met up with Louise and showed pictures of mum’s ring how it was and had ring as it was now. It has such huge sentimental value to me as mum had always been so keen for me to wear it again in future years. It had been sat in my drawer for 6 years till I found Louise and Honour and after lots of chats Louise knew how much of a copy I wanted for mum’s ring to have the same look and feel it always had to me as a child growing up and seeing it on mums finger.
Well we were so happy when she sent the cast pictures over but nothing could delight us more when we went to pick it up it’s like seeing mums ring from years ago again and to now be able to wear it everyday and see mums ring as is is just amazing and so emotional.
Thank you so so much again I would never go to anyone else now for in future.
Would highly recommend Honour can’t speak high enough of Louise and her team.
‘

Come and talk with us about restoring mum’s engagement ring – or any other repair or refurbishment work.

We offer jewellery insurance for the pieces we craft from scratch or refurbish entirely, in partnership with TH March. Click here for more information.

Have a browse through what our customers say about us.

FAQ – Frequently Asked Questions

Can you fix or rebuild a piece that’s this worn or damaged?

Yes — depending on condition, we can either repair specific damage (re-tipping claws, re-soldering joins) or, for pieces that are very worn, fully rebuild them using a 3D scan of the original, resetting your existing stones into the new piece.

Can you size rings to fit?

Yes – we can size rings up or down in size and use a variety of methods to achieve the correct fit for you.

Can I have something similar made?

Yes — every piece we make is bespoke, so we can create something inspired by this story but personalised to you. Book a free consultation and we’ll talk through what’s possible.

How much would a piece like this cost?

It depends on the metal, gemstones, and complexity of the design, so we always provide a personal quote. As a guide, see our Pricing Guide for typical starting prices, or book a free consultation for an accurate quote for your idea.

How long would a piece like this take to make?

Timeframes vary depending on the piece and process involved — typically a few weeks for simpler work, and up to 6–10 weeks for a full bespoke design. We’ll give you an accurate timeframe for your specific piece at your consultation.

How do I get started on a piece like this?

Book a free, no-obligation consultation — in person at our Shaftesbury Design Studio, by video call, or over the phone. We’ll talk through your idea, any gold or gemstones you’d like to use, and what’s possible, before any design work begins.

Book a Private Design Consultation.

Are you ready to have a chat about a jewellery creation? Our private consultations are held free of charge with no obligation to proceed.

We can meet in person at our Shaftesbury Design Studio or via Video Call. We can work via courier service if you are not local to us and have customers all over the UK.

Meet in Person
Book a Call