‘Holding You’ Rings

This Mum had been diagnosed with cancer and wanted to give her two children bespoke handmade platinum rings, that symbolised her holding them. It was such a privileged to be chosen to design and make these for her family.

Faced with the prospect of leaving her teenage children behind, Mum wanted to have bespoke rings made in a precious metal with gemstones set into them. She wanted to symbolise holding her children, and for them to feel that she was always with them.

We are really happy to say that at the time we write and publish this, due to brand new cancer treatments, this Mum is still with us and fighting hard to stay!

Mum made an appointment to see Louise at our Shaftesbury Design Studio and brought an antique family ring with her. She felt that this ring was uncomfortable to wear because of the bobbles on the bottom. She wanted to give the central sapphire to her daughter.

Louise discussed different design options and they came up with the idea of two hands holding a central gemstone. For her daughter, Mum wanted the sentimental sapphire, and for her son she wanted a black stone.

These rings were created in CAD; a powerful computer program that allows us to design jewellery. Louise showed Mum her initial setting design idea to ensure that she was on the right track, and that she recreated what Mum was thinking of.

We needed to take their sapphire out of its ring so Louise could measure it properly. Mark carefully unset her sapphire, he cut through the back of the setting to open it up are remove the sapphire undamaged. Louise needed to accurately measure this sapphire to ensure the setting fitted it perfectly. Once Mum had agreed the initial design idea, we carried on and created her daughters ring in CAD around their sentimental sapphire.

Mum knew that she wanted a white metal, so Louise talked through the differences between white gold and platinum. They agreed on making both rings in solid platinum. Once we have the initial CAD sketch approved (black image above) we create photo-realistic images that are called renders. These images show exactly what the finished ring will look like in platinum with their sentimental sapphire set inside.

Mum and daughter revisited our Design Studio to approve this design, Mum asked us to make a start on designing her sons ring. This ring was going to have the same setting design with a pair of hands, but it would have thicker shoulders – making it look more like a gents signet ring.

Her son wanted a black onyx gemstone to go into his ring. Louise sourced a selection of black onyx’s for him to choose from. He visit our Design Stdio with Mum to get his finger measured and to hand pick the onyx he liked the best.

You can see the difference between her daughter’s finer design, and her sons chunkier one. Her son particularly liked the subtleness of the hands in these designs, he didn’t want the hands to dominate, and wanted it to look like a ‘normal’ ring from the top view.

We 3D printed the wax copies (purple version below) to cast these in platinum, Louise double checked that their sentimental sapphire would fit into its new setting exactly. We also 3D printed a resin copy (grey version below) of her sons finished ring with the onyx set into place.

Viewing a grey 3D printed resin first gives you complete peace of mind, you can try on the finger size and double check that you are happy with all of the dimensions, before any precious metals are cast.

You can see the freshly cast platinum on the far right side of the third image above. This is a clear demonstration of how exact our 3D printed resin copies are of the finished piece.

The extra pieces of platinum on the shoulders of her Son’s ring are called the sprue. This is where the molten platinum flowed into the mould during Lost Wax Casting. Placing the sprue’s on both sides of this ring at its widest part, ensures an equal flow of molten platinum and a good casting to work with.

We also cast her Daughter’s ring in platinum, you can see the details of this above. This ring had it’s sprue placed at the bottom, this ring only needed one sprue because it is much finer than her brothers one.

You can see the texture that the fresh platinum has. It looks similar to a fingerprint and give the precious metal a satin look.

The next step is to ‘clean up’ these castings. Mark used needle files, different grits of sandpaper and our polishing wheel to bring this metal up to a high shine. It takes hours to clean up platinum, we decided to leave a tiny amount of texture on the actual hands so they looked more realistic.

You can see the differences these processes make to the platinum. Slowly, the metal is brought to a high shine, perseverance and being consistent with polishing techniques is the key to an even shine!

The final job was for our Mark to set these gemstones into their new homes. One final polish later and…. Ta Dah!!

Two platinum ‘Holding You’ rings; a chunkier one for Mum’s son set with a black onyx, and more delicate version for her daughter set with a family sapphire.

It was such a pleasure to be able to welcome Mum back to our Design Studio to collect these bespoke handmade platinum rings, she presented them to her children at a family gathering.

We wish her all of our love and strength with her cancer battle, and hope that these rings bring her children some comfort.

Come and see us about your bespoke handmade platinum rings.

We offer jewellery insurance for the pieces we craft from scratch or refurbish entirely, in partnership with TH March. Click here for more information.

Have a browse through what our customers say about us.

FAQ – Frequently Asked Questions

Do I need to know exactly what I want before starting a bespoke design like this?

No — many bespoke commissions start with just an idea, an inspiration image, or even something similar to this story. We’ll work through the details with you at your consultation, before any CAD design begins.

Can I have the same as a bespoke piece made?

We pride ourselves on bespoke jewellery designs that are important to our clients, we can make changes to a previous design to mean it is created as a bespoke piece for you.

Can I have something similar made?

Yes — every piece we make is bespoke, so we can create something inspired by this story but personalised to you. Book a free consultation and we’ll talk through what’s possible.

How much would a piece like this cost?

It depends on the metal, gemstones, and complexity of the design, so we always provide a personal quote. As a guide, see our Pricing Guide for typical starting prices, or book a free consultation for an accurate quote for your idea.

How long would a piece like this take to make?

Timeframes vary depending on the piece and process involved — typically a few weeks for simpler work, and up to 6–10 weeks for a full bespoke design. We’ll give you an accurate timeframe for your specific piece at your consultation.

How do I get started on a piece like this?

Book a free, no-obligation consultation — in person at our Shaftesbury Design Studio, by video call, or over the phone. We’ll talk through your idea, any gold or gemstones you’d like to use, and what’s possible, before any design work begins.

Book a Private Design Consultation.

Are you ready to have a chat about a jewellery creation? Our private consultations are held free of charge with no obligation to proceed.

We can meet in person at our Shaftesbury Design Studio or via Video Call. We can work via courier service if you are not local to us and have customers all over the UK.

Meet in Person
Book a Call